Feb 212015

In Part 1, we looked at where to start and basic continent considerations for drawing a fantasy map.  Now we’ll look at some geographical considerations.

Remember Geography

Having a basic sense of geography is important or your map won’t make sense.  Some of this is obvious but is still worth pointing out.


For example, rivers flow downhill and generally toward the sea eventually.  Avoid randomly drawing rivers going in various directions without a mountain, rolling hills, or possibly a lake as a starting point.

Similarly, rivers often feed lakes, which typically drain out their lowest side as another river.

English: Map of the course, watershed, and maj...

English: Map of the course, watershed, and major tributaries of the Mississippi River. (Photo credit: Wikipedia)

Lakes form in a low area surrounded by higher areas, even if we’re only talking less than a hundred feet of difference, so where you choose to have the river exit the lake means that area is lower.  As you draw, you are implying the general rise and fall of the land in an area.

There will be many more rivers than the ones you put on the map, so when it comes to drawing the map, we’re talking about the big ones here, like the Mississippi River.


For mountains, remember that they tend to form a rough line, such as east to west, because two tectonic plates are at odds with each other and those plates have an area of conflict at their edges.  Mountains appear above this.  A line of mountains can be very thick, as in 20 miles wide, but generally, they are still in a line, as opposed to a circle, for example.  You could have a mountain range that is 20 to 40 miles east to west but forms a rough line 500 miles north to south.  There are no mountain ranges that form a figure eight, for example, and while that would be interesting, it would also be ridiculous unless you have a good explanation.

Some mountains are volcanos and you can put an isolated mountain anywhere because of this, but they often aren’t isolated.  If you have a volcanic range, the same “line” idea tends to be true.  The Hawaiian Islands are a good example.

If you have two mountain ranges on your continent, each is probably being caused by different tectonic plate activity.  Both don’t need to be north to south, for example, but if they’re 90 degrees to each other (one is north-south, the other east-west), avoid putting them next to each other because nature doesn’t generally draw an L-shaped range.

Other Features

Forests are everywhere and are a kind of freebie in map drawing in that you can put one anywhere, in any shape.  They stand alone, have rivers cutting through them, and go up mountains and over rolling hills.  For that reason, consider drawing them last.

Grand Canyon, Arizona. The canyon, created by ...

Grand Canyon, Arizona. The canyon is 277 miles (446 km) long, 4 to 18 miles wide (6.4 to 24 kilometers), and attains a depth of more than a mile (1.6 km)

A desert is caused by lack of rainfall and/or water, so don’t draw a river and then put a desert around it, unless you’re modeling it on the Grand Canyon, where there’s only green vegetation at the bottom near the water.

Don’t forget roads, whether solid ones that stand the test of time or dotted lines indicating it’s a road less well-kept, maybe due to being farther away from civilization or because it goes somewhere hazardous; either way, it’s less well-traveled.

Drawing When You Can’t Draw

I can’t draw to save my life.  Fortunately, I don’t really need to.  In fact, being bad at drawing might help because we’re not trying to draw land features with straight edges – that’s not how nature works and it doesn’t look good on a map.  Embrace your inability and exaggerate it to form gently flowing edges to land features.

Initially, I typically don’t draw individual trees or mountains, just oddly-shaped ovals (or whatever shape) to indicate the boundary.  These shapes ultimately give your continent or region its character as they accumulate.  Don’t sweat over it at first, either, as making it more artistic is usually a matter of tweaking.  If you draw a rectangle with rounded corners and call it a forest, you can make it look less like that shape be extending a corner or two, or “cutting out” a section.  You basically want malformed shapes that seem sort of organic.

One tactic is to take an existing continent (or island) and try to draw it while purposely changing various things about the coastline so people don’t automatically think, “that’s Africa,” for example.  Turning them upside down or sideways helps.

Drawing By Hand

You may want to first sketch ideas on unlined paper, using a pencil so you can erase often, because it’s easier than getting into a computer program from the start.  One drawback is that if you like the result and want to digitize it later, you’ll have to redraw it with a mouse.  If you can actually draw for real, this may be your best bet because it looks authentic.

Map Generation Software
Lorynn Kingdom

Lorynn Kingdom

A quick internet search will turn up several options for drawing maps.  I’ve only used one (Campaign Cartographer), but one thing to keep in mind is to save your work often as you go along.  It’s also a good idea to save a new file each time so that you can go back to a previous incarnation.  Let’s say I’ve saved it ten times, after ten major changes.  Then I decide I don’t like the last three and wish I could go back to version 7.  That’s impossible if I’ve been overwriting the same file every time.

You’ll want to add lots of names, including kingdoms, settlements, and those of land features like forests and rivers.  I’ve found that I can include more names without the result being ugly if I use a different style or font for each type.  I usually did this in a separate program like Photoshop, but your map making software might allow it, too.


While some of these reminders are obvious, it’s easy to start drawing a map without thinking it through and end up with something nonsensical. If you have any tips, please add them in the comments, especially if you’ve used other map generation software.

Creating a Fantasy City, Part 1

Without cities, towns, and villages, no fantasy world building project is complete.  In part 1, we’ll look at some things to consider.  Part 2 will be the template I use for creating a new settlement. Location, Location, Location No settlement stands alone.  A city has towns nearby, and towns have villages nearby.  However, when drawing […]

Creating a Fantasy City, Part 2

Below is the template I use when creating a fantasy city during world building.  Feel free to adapt it your purposes. You can read Part 1 here. Download the PDF or Word template. City/Town Name General Alliances Independent city or part of a kingdom?  Allies? Identification Symbol and Banner: City Colors: Slogans: Famous For What […]

Creating Fantasy Names For Your Fiction Stories

Depending on your ability, creating names for people, places, and beings in fantasy books can either be fun or a pain.  I’ve been doing this for three decades and will provide some tricks and thoughts to help. KISS KISS doesn’t really stand for “keep it simple, stupid”, but it’s a good principle to follow when […]

Fantasy Species vs. Race?

What’s the difference between “race” and “species” and when should you use what in your fantasy settings?  I’ve taken a look into this myself and made the right choice for me.  Read on for ideas on making the right choice for you. Race What’s a race?  The answer can be complicated (but interesting reading), but […]

How Mountains Affect Rainfall

When drawing maps of continents, being realistic is a good idea even when inventing for a fantasy or SF landscape. We’re not freed from plausibility unless we’re purposely throwing out the laws of physics and nature. Most of us are probably creating reasonably Earth-like terrain, but even if not, there are natural forces at work […]

How to Create Fantasy Races or Species, Part 1

In this three part series, we’ll look at creating races in fantasy books. This entry focuses on the physical considerations, while Part 2 will discuss the mental ones. Part 3 includes a downloadable template you can use. While using the standard elves, dwarves, dragons, and other usual suspects in fantasy fiction is fine, and maybe […]

How to Create Fantasy Races or Species, Part 2

In part 1, we looked at some physical considerations when creating races in fantasy books, while building your own world. Now we’ll look at some mental aspects. Mental Considerations Worldview When I watch alien species/races on TV or see them in print, more often than not, I feel like they’re just humans in costume, for […]

How to Create Fantasy Races or Species, Part 3

In Part 1 we discussed the physical aspects of creating races in fantasy books. Part 2 covers the mental.  Now we’ll look at a downloadable template you can use as a starting point to aid your creative writing. Download the PDF or Word template. The Template Fantasy Race/Species Name Here Nicknames: “” Famous For General […]

How to Create Plants and Animals for Your Fantasy Setting

In another blog, I discussed whether you should create plants and animals for your fantasy setting.  Assuming you’ve decided to do it, here are tips for doing so. New Ideas If you already have ideas, you can just write them up according to a template like the one I’ve provided here: The Template Animal/Plant Name: […]

How to Draw a Fantasy Map, Part 1

One of the fun aspects of fantasy world building is drawing maps. This blog provides some ideas to keep in mind and tools to help. Some of this is kind of obvious but worth mentioning anyway. Where to Start A good working unit is the continent.  Despite the term “world building,” fantasy authors usually write […]

How to Draw a Fantasy Map, Part 2

In Part 1, we looked at where to start and basic continent considerations for drawing a fantasy map.  Now we’ll look at some geographical considerations. Remember Geography Having a basic sense of geography is important or your map won’t make sense.  Some of this is obvious but is still worth pointing out. Rivers For example, […]

My Guest Post

Today, author John Robin was kind enough to publish a guest post of mine about species and races in world building. You can read it here. The article is drawn from Creating Life (The Art of World Building, #1), which  Amazon has listed as a hot new release in its category, currently at #4 (down […]

Should You Create Plants and Animals in Your Fantasy Setting?

When world building, I used to think there was no point in inventing animals and plants for a fantasy setting.  After all, they’re often just variations on real Earth animals, in which case, why bother?  For example, maybe you have a horse with an extra pair of legs, or a tomato that’s yellow and poisonous, […]

Get a FREE Copy of The Ever Fiend (Talon Stormbringer)
"Randy Ellefson has really made himself a name to watch with this debut. A stand out for dark fantasy - 4.5 Stars!" - Self-Publishing Review